CORRECT CRAFT AIR Uživatelský manuál stáhnout pdf (Strana 128)

6-6

Section 6

Correct Craft, Inc.

Before starting checklist:

1. Engine oil level - boat must be level.

2. Transmission oil level - boat must be level.

3. Shifting linkage and detent in forward, neutral and reverse.

4. Leaks (water, fuel and oil).

5. Coolant level (closed cooling system).

6. Operation of the throttle and transmission shift control.

7. Battery condition.

8. Visually inspect for any loose mounting fasteners.

9. Verify the emergency stop switch located by the throttle is fully

functional and the lanyard is not frayed or damaged. Clip the

safety lanyard securely to your body. Keep it attached at all times

while you are driving.

10. Check that engine cooling water (raw water) valve is open and

raw water strainer is clean.

• Once the boat is in the water, visually check for water leaking

at the stuffing box. This stuffing box must drip a moderate

amount of water to properly lubricate the drive shaft. If the

water is coming in rapidly, pull the boat out of the water and

have your Correct Craft Dealer adjust the stuffing box. There

is a detailed instruction for this in the boat care section. This

stuffing box has right-hand threads.

CORC015

Naut Air Sec 6.qxd 7/12/05 1:15 PM Page 6-6

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 183 184

Žádné komentáře

CORRECT CRAFT AIR Uživatelský manuál Strana 128